【Labeling Machine】Do you know the labeling method of the labeling machine?

The labeling machine has become a very important part of the packaging in the back-end packaging process. It not only reduces labor costs and improves productivity for the company, but also further improves the level of the outer packaging box of the product. , so that the company's brand image can be presented faster. The labeling machine has to achieve visual impact. One of them is the prevention of warpage in the labelling. Label the pipe before it is canned, and then carry out canning and sealing after the labeling. The heating during the whole process of sealing poses a challenge to the label, especially when it is not optimistic. bigger. In the specific application, almost every manufacturer has similar problems, and there are various ways to deal with them.

The labeling machine now has four labeling methods for you to choose from:

1. The labeling method of the corner labeling machine: absorb the printed label on the labeling plate, apply it according to the cylinder, and then carry out the labeling from the corner of the rim of the label, suitable for the carton that must be sealed, etc. Labeling of products on the outer box.

2. Pneumatic labeling machine labeling method: absorb the printed label on the labeling plate, and then apply it according to the cylinder, which is suitable for labeling of raw materials for most outer packaging boxes such as cardboard boxes.

3. The labeling method of the lower swing arm labeling machine: the printed label is absorbed on the labeling plate, and then a device like an arm is shaken at the set angle, and the label is attached to the carton or turnover material. , The adjustable angle range is suitable for the situation where the rotation material and the angle of the labeling machine cannot be made above or on the side.

4. The labeling method of the blowing and sticking labeling machine: the printed label is pre-printed to the bottom of the blowing and sticking equipment, and then the blowing and sticking equipment blows and sticks the label on the packaging materials such as cartons. This method has little impact on the material. , suitable for packaging materials with excessive discomfort tolerance.

When the labeling machine is labeling, the operation efficiency of the bottle body should be slightly faster than the labeling rate of the label, which can prevent the formation of air bubbles. Before labeling, the labeling machine should completely eliminate static electricity, so that the label can stand out and get rid of the backing paper. The labeling machine should not use brushes, sponge rollers, or vacuum pump suction methods for labeling. A plastic scraper with a certain compressive strength should be installed to touch the label, and the scraper should maintain a certain angle and amplitude. The labeling of the soft bottle body should adjust the relationship between the labeling rate, the blade width, the angle and the spacing.

Dongguan Yichuang Intelligent Equipment Technology Co., Ltd. (hereinafter referred to as "Yichuang Intelligent") is an automated packaging production equipment manufacturing enterprise integrating R&D, design, production and sales. The company is located in "Liaobu", a famous automation town in Dongguan. Obtained a number of patents, the company's main products are automatic sleeve labeling machine, automatic labeling machine, packaging machine, filling machine, capping machine, back-end packaging equipment, back-end packaging production line. The products are sold at home and abroad with the advantage of high cost performance. Facing the ever-changing technological innovation and the increasingly fierce market competition, we have won the trust and support of our customers with good reputation and excellent quality. Widely used in 3C electronic products, food, daily necessities, medicine, chemical and other industries.